Open Settings, then School Setup, then Academic Year. This is where the school session is defined, and it should be done before grades, sections, and students. The list shows the year name, the start date, the end date, which campuses it covers, the semesters, and whether it is the current year. Only one year should be marked Current. Use the pencil to change a year, the eye to view it, and the bin to delete it. For many years at once, choose Download format, fill the sheet, and Upload Excel. Rows that pass are saved. The file that comes back has UploadRemarks on every row, so fix only the failed rows and upload those again. To add one year, click Add Academic Year.
Screen 2
Add Academic Year
In Add Academic Year, type a unique year name, such as 2026-2027. Set the start date and the end date with the calendar. The start must be earlier than the end. Tick Current year only for the session the school is working in now. Leave Apply to all campuses ticked when every branch uses this year. Clear it when the year belongs to selected campuses only, then tick those campuses. If the year has semesters, use the calendar icon on the year row after it is saved, and add each semester with its name and dates. Click Add Academic Year to save. Close the dialog with the X if you are not ready.
Open Student Code under School Setup before you register students. This rule builds every new admission number. Numbering resets for can be the whole school, or a smaller group if each campus or year should start again. Starting number is the first number of a new sequence. One is the usual start. Code prefix is optional, such as STU. Number length sets how many digits are used. Five digits turns 1 into 00001, and a longer number is never cut short. Tick Include academic year in the student code when the year should appear in the number. The green example updates as you change the fields. Here the example is STU-26-27-00001. Click Save Configuration. Existing student codes are not rewritten.
Open Campuses under School Setup. A campus is a branch of this school. Every section, staff member, and student is attached to one. The table shows the campus code, the name, the school, the city, the country, and whether it is active. Search the box above the table, or change how many rows are shown. The pencil edits a campus, the eye opens the details, and the bin deletes it. Do not delete a campus that already has sections or students. For several branches, Download format, fill Campus code, Campus name, city, and country, then Upload Excel. Click Add Campus for a single branch.
Campus code is the short unique code you will type on later sheets, such as MAIN. Campus name is the full branch name. City and country are optional but useful on reports. The school is taken from this login, so a new campus belongs to the signed-in school. Leave Active ticked so the branch can be selected on sections, staff, and students. Click Add Campus. Use the same code everywhere else. Do not create a second code for the same branch.
Open Grade Level under School Setup. A grade is a class, such as Grade 1 or Grade 12. Create grades before sections. Sort is the display order. One is the first class and twelve is the last. Active Yes means the grade can be used on sections and admissions. The pencil edits the name or the order, the eye shows the details, and the bin deletes a grade that has no sections. Add Grade Level creates one class. Download format and Upload Excel create many classes from one sheet. Keep the names exactly as you want them on sections, because later forms match the grade by this name.
Type the grade name exactly as it should appear, for example Grade 1. Sort order controls the list. Use 1 for the youngest class and increase it for each next class. Leave Active ticked. Click Add Grade Level. Repeat for every class, or close this dialog and use the Excel format when you have the full list. Do not create two grades with the same name.
Open Section under School Setup after campuses and grades exist. A section is one class group, such as Grade 1 section A on a campus. The table shows the campus, the grade, the section name, the subject discipline, the class incharge, the capacity, and whether it is active. The pencil edits the row, the eye opens details, and the bin deletes a section that has no students. Add Section creates one group. For a whole school, download the format and upload one row per campus, grade, and section. The same section letter can exist in different grades. It cannot be repeated for the same campus and grade.
Choose the campus first. The grade list stays empty until a campus is selected. Then choose the grade and type the section name, usually A, B, or C. Capacity is the number of seats, and it can be left blank. Subject discipline is optional. Assign it when this section follows a fixed group such as F.Sc Pre-Medical. Class incharge is the home-room teacher. That list also waits for the campus, and the teacher must already be registered. The note on the form says this teacher is used as the assigned teacher on datesheets when no subject teacher is set. Leave Active ticked. Click Add Section.
Open Subject under School Setup. Subjects are used by the timetable, exams, homework, and teacher allocation. Each row has a code, a name, the maximum marks, whether it is practical, and whether it is active. Maximum marks of 100 is the usual default. Practical Yes is for subjects that have a practical paper. The pencil edits the subject, the eye shows details, and the bin removes a subject that is not in use. Add Subject creates one. Download format and Upload Excel load the full catalog. Keep the subject code short and stable, because later sheets refer to that code.
Subject code must be unique, for example ENG or MATH-001. Subject name is the name printed on reports. Max marks is the default total, usually 100. Tick Practical when the subject has a practical component. Leave Active ticked. Click Add Subject. Register every subject before you build subject disciplines, the timetable, or exams.
Screen 12
Subject Discipline
Open Subject Discipline under School Setup after subjects exist. A discipline is a subject group for a section, such as F.Sc Pre-Medical or Matric Computer. The table shows the code, the name, every subject in the group, how many sections use it, and whether it is active. The pencil edits the group, the eye shows it, and the bin deletes a group that no section uses. Add discipline creates a new group. Go to Sections jumps to the section list, where you attach a discipline to a class. A green Discipline updated message means the last save succeeded.
Screen 13
Add Subject Discipline
Code is a short unique key, and Name is the full group name. Both are required. Description is optional. Leave Active ticked. Under Subjects students must pass, tick every subject that belongs to this group. The code under each name is the subject you already registered. A student in a section that uses this discipline is expected to take the ticked subjects. Click Create discipline. Cancel closes the dialog without saving. After the group exists, open the section and choose it in Subject discipline.
Screen 14
Staff Designation
Open Staff Designation under School Setup before you register people. A designation is the job, such as Teacher, Principal, Clerk, or Accountant. Category groups the job, for example Academic, Administration, or Finance. Teaching Yes means the person can be assigned as a subject teacher. Registered staff is the number of people already saved under that job. The eye opens the people in that designation. The pencil edits the job. The bin deletes a job that has no staff. Add Staff Designation creates one job. You can also download the format and upload the full list.
Screen 15
Edit Staff Designation
This is the same form for a new job and for an edit. Designation name is the job title. Category is the group, such as Academic or Administration. Tick Teaching staff for teachers and coordinators who take classes. Leave it clear for clerks, accountants, and administrators. Click Save changes. On a new job the button says Add Staff Designation. Create every job you need before the staff registration, because each person must be given one of these designations.
Screen 16
Staff Registration
Open Staff Registration under School Setup. The cards show how many people are registered, how many are active, how many campuses are covered, and how many designations are in use. Filter by campus or designation, or search by name, code, or designation. The register shows the staff code, the name, the job, the campus, the role detail, and the status. Role detail shows the login id, and for a teacher it can also show the periods. The pencil edits the person. The eye opens the record. Click New staff to register a teacher, clerk, accountant, principal, or any other job you defined.
Staff code is required and must be unique. First name is required. Last name, email, registered mobile, and biometric code are optional. The biometric code must match the device if you take staff attendance by machine. Under Assignment, choose the campus and the designation. Designation is required, so the job must already exist. Join date and employment status record when the person started and whether they are active. Under Payroll, choose the salary mode and the base salary. Leave Active record ticked so the person can be assigned and paid. Scroll the dialog for the remaining fields, including primary subject, availability, and role detail, then save. Role detail can hold the login id. Photos and documents are added on the person after the record exists.
Screen 18
Menu Access Management
Open Menu Access Management under School Setup. This is your school's own side menu and top menu. Another school does not see this copy. Each row is one menu item: the name, the route, the parent, the order, and the permission. Drag a row to change its place. Put a form under a module by choosing that module as the parent. The permission control is a list of registered designations. Select every designation that may open the page. A page with no designation selected follows the normal role access. A page with designations selected is shown only to staff in those jobs. Save when the menu is arranged. Open a form afterwards with a user of that designation and confirm the item is visible.
Open Data Migration under School Setup when you are loading an existing school, or when a form has many rows. Follow the numbers from the top. Download format on that step. Row 1 tells you how to fill each column. Row 2 is the header. Data starts on row 3. Use the same campus code, grade name, and subject code that you already saved. A column added on a form is included the next time you download. Upload the filled file on the same step. Successful rows are saved. The returned file has UploadRemarks. Fix the failed rows and upload those again. Do not upload a later step before its earlier step. The Excel button on Academic Year, Campus, Grade, Section, Subject, Staff Designation, and Student Registration uses this same format. Leave UploadRemarks blank when you fill the sheet.